Teresa Puig
Ultrafast growth of ultrahigh performance superconducting tapes (ULTRASUPERTAPE)
2015
2015
The ULTRASUPERTAPE project is an unprecedented approach for low cost/high throughput/high performance high temperature superconducting tapes for the new clean, efficient and smart energy paradigm. A transient liquid assisted growth (TLAG) in chemical solution deposited layers is used to reach ultrafast growth of thick superconducting tapes. An integrated system based on additive manufacturing and digital printing is devised to address a competitive manufacturing process with very high throughput and low cost, where combinatorial chemistry is selectively used for fast screening. Ultra-high tapes performances at high and ultrahigh magnetic fields are envisioned by maximizing the superconducting condensation energy with local strain and electronic state engineering.
Mariano Campoy-Quiles
Finding a needle in a haystack: efficient identification of high performing organic energy materials (FOREMAT)
2015
2015
With the aim of achieving breakthrough advances in the performance of organic photovoltaic and thermoelectric applications, the FOREMAT project will develop a high throughput platform that will enable the ultrafast identification of promising organic materials, simultaneously producing design rules for improved compounds and composites and efficiently optimizing device performance.
The goal is to deliver organic material systems with a step-change in performance, bringing them close to the expected market turn point, including panchromatic organic photovoltaics with ca 15% efficiencies and thermoelectric devices that could revolutionize waste heat recovery by their flexibility, lightweight and high power factor. The development of multicomponent materials promises to dramatically improve the cost, efficiency and stability of organic energy devices.
The goal is to deliver organic material systems with a step-change in performance, bringing them close to the expected market turn point, including panchromatic organic photovoltaics with ca 15% efficiencies and thermoelectric devices that could revolutionize waste heat recovery by their flexibility, lightweight and high power factor. The development of multicomponent materials promises to dramatically improve the cost, efficiency and stability of organic energy devices.
Gerard Tobias
Nanoengineering of Radioactive Seeds for Cancer Therapy and Diagnosis (NEST)
2017
2017
The NEST project that focuses on the preparation of radioactive nanomaterials, smaller than the size of human body cells, for the diagnosis and treatment of cancer. Depending on the nature of the employed radioactive materials, it is expected that the nanomaterials prepared will allow both an early diagnosis of tumors and their treatment in a localized manner, thus minimizing damage to healthy tissue.
Núria Aliaga-Alcalde
Efficient electronic transport at room temperature by T-shaped molecules in graphene based chemically modified three-terminal nanodevices (Tmol4TRANS)
2017
2017
The project Tmol4TRANS is dedicated to the design of molecules, which inserted in nano-transistors based on graphene, will produce efficient conductance at room temperature. It is also expected to optimize the device and production since the hybrid between the molecule and the device will have a high reproducibility. This is a project that wants to encourage the use of molecules in electronic devices that we use every day to improve their performance. Tmol4TRANS would have a direct impact in Molecular Electronics and Spintronics, as well as in the broader scope of nanoelectronics.
Massiliano Stengel
Hierarchical multiscale modeling of flexoelectricity and related materials properties from first principles (MULTIFLEXO)
2017
2017
The MULTIFLEXO project objective is to advance decisively in the theoretical understanding of flexoelectricity (a phenomenon whereby a material generates electricity by suffering a non-homogeneous deformation, for example by bending) and more generally, of material properties that emerge from a non-uniform distortion. The theoretical study of these properties presents a great challenge that Max Stengel has assumed as a pioneer in the simulation of the first principles of flexoelectricity and he approaches it with an innovative multiscale strategy that integrates quantum-mechanical calculations with a description of solids and nanostructures on a larger scale. The tools that will provide will allow in the future, the design of innovative devices for energy harvesting, innovative transducers and photovoltaic materials with improved properties.
Agustín Mihi
Photonic electrodes for enhanced light management in Optoelectronic devices (ENLIGHTMENT)
2015
2015
The ENLIGHTMENT project is aimed at the fabrication of different types of low cost and large area photonic architectures to improve the performance of solar cells, sensors, photodetectors and many other devices. Nanostructured dielectric and metallic photonic architectures can concentrate the electric field through resonances, increase the light optical path by strong diffraction and exhibit many other interesting optical phenomena that cannot be achieved with traditional lenses and mirrors. This research plan is aimed to develop photonic electrodes that will enhance light matter interaction based on wave optics phenomena while being fabricated with techniques fully compatible with today’s mass production approaches, allowing seamless integration of wave optics components in current devices.
Marta Mas-Torrent
Surface self-assembled molecular electronic devices: logic gates, memories and sensors (e-GAMES)
2012
2012
The ERC Starting Grant e-GAMES is dedicated to organic electronic devices, such as molecular logic gates for the storage and transmission of magnetic and optical information and for locally controlling surface wettability; ambipolar organic field-effect transistors with donor-acceptor systems and their exploitation in light, temperature or pressure sensors, and/or memory devices; and organic/inorganic hybrid devices based on field-effect transistors for sensing environmentally hazardous carbon nanoparticles.
Alexandre Ponrouch
Calcium and Magnesium metal anode based batteries (CAMBAT)
2017
2017
CAMBAT addresses important challenges in the quest for a sustainable future, since batteries are essential components in a wide range of “everyday” technologies. It aims at developing new sustainable battery chemistries based Ca or Mg metal anodes which would bring a breakthrough in terms of energy density, while relying on much more abundant elements as compared to today’s state of the art Li-ion technology. A milestone of this project is the formulation of new non-corrosive electrolytes with enhanced ionic transport that would promote the formation of a stable electrolyte/electrode interface. This should enable building laboratory prototype cells with enhanced energy density and lower cost than commercially available Li-ion batteries.
The European Research Council (ERC) has a number of funding schemes amongst which the Starting Grant is a very prestigious one that aims at encouraging young talented research leaders to gain independence in Europe and to build their own careers.
The European Research Council (ERC) has a number of funding schemes amongst which the Starting Grant is a very prestigious one that aims at encouraging young talented research leaders to gain independence in Europe and to build their own careers.
Marta Mas-Torrent
Large Area Organic Devices with Bar-Assisted Meniscus Shearing Technology (LAB-TECH)
2014
2014
This Proof-of-concept ERC grant is devoted to organic electronic devices, such as organic field-effect transistors (OFETs), which are raising an increasing interest for their potential in large area coverage and low cost applications.
